Author Index

A

  • Abbasi, A. Sensitivity Analysis of Maneuverability of an AUV to Added Mass Coefficients Variations [Volume 9, Issue 2, 2019, Pages 1-13]
  • Abbasi, S. Aerodynamic Design of a transonic axial Fan with Low Aspect Ratio and Validating [Volume 9, Issue 1, 2019, Pages 251-264]
  • Abdolalipouradl, M. Energy and exergy analyses of various configures for combined flash-binary cycles using Sabalan geothermal wells [Volume 9, Issue 4, 2019, Pages 237-249]
  • Afrand, M. Experimental Investigation of the Effect of Location of Cylindrical Protuberance on the Thrust Vector of a Supersonic C-D nozzle [Volume 9, Issue 1, 2019, Pages 237-249]
  • Afrousheh, M. Improve the Crashworthiness Properties of AA7075 Tube under Axial Impact Loading by Geometrical Change [Volume 9, Issue 1, 2019, Pages 55-69]
  • Afshari, A. Numerical Investigation of the Effect of Different Inflow Conditions on Turbulent Boundary Layer Flow Characteristics using Large-Eddy Simulation [Volume 9, Issue 2, 2019, Pages 261-274]
  • Aftabi Sani, A. Enhanced two-dimensional differential transform method for solving homogenous Dirichlet problems; Application: heat transfer in bars [Volume 9, Issue 4, 2019, Pages 209-226]
  • Ahmadi, Ali Numerical Investigation of Bending Angle and Entropy Generation in Laser Forming of High Strength Steel [Volume 9, Issue 4, 2019, Pages 151-166]
  • Ahmadi-Nejad joushani, H. Investigating the effects of microtubules in the neuronal cell response to the blast load using fluid-structure interactions method [Volume 9, Issue 3, 2019, Pages 13-24]
  • Ahmadi Sheikhsarmast, N. Influence of gas channels and Gas Diffusion Layers configuration on the performance of Polymer Electrolyte Membrane Fuel Cell [Volume 9, Issue 3, 2019, Pages 249-263]
  • Ahmadzadeh, O.R. Mass Detection by Theoretical and Experimental Frequency Response Analysis of Bending Piezoelectric Actuators [Volume 9, Issue 4, 2019, Pages 27-39]
  • Ahsani Tehrani, H. Control a class of fractional-order systems with delay in a specified sector [Volume 9, Issue 3, 2019, Pages 51-63]
  • Akbari, A. A. Dynamic responses assessment in fault diagnosis of multi-function active engine mounts with cooling capacities [Volume 9, Issue 3, 2019, Pages 1-12]
  • Akbari, D. Application of laser shearing interferometry in non-destructive inspection and size estimation of plane defects [Volume 9, Issue 4, 2019, Pages 1-14]
  • Akbari, M. A. Analysis of a High-Speed Underwater Supercavitating Projectile Dynamics, Based on an Experiment [Volume 9, Issue 1, 2019, Pages 279-291]
  • Akbari, Z. Performance evaluation of Ferric oxide (Fe3O4) and Graphene nanoplatelet (GNP) nanoparticles in solar steam generation [Volume 9, Issue 2, 2019, Pages 181-196]
  • Akbarzadeh, P. Numerical Simulation of steady and unsteady natural convection heat transfer of nanofluids in eccentric and concentric porous annuluses [Volume 9, Issue 4, 2019, Pages 117-136]
  • Akbarzadeh Tootoonchi, A.R. Design & development of modular compact series elastic actuator for lower limb extremity assistant exoskeleton [Volume 9, Issue 3, 2019, Pages 109-123]
  • AliTavoli, M. Noise Removal from the Vibration Signals of the Rotating Machinery Using the Empirical Wavelet Transform and the Conventional Thresholding Methods [Volume 9, Issue 1, 2019, Pages 111-124]
  • AL Rkabi, M. Performance Comparison of the Electro/Magneto-Rheological Elastomers for Vibration Reduction of Rotating Rotors [Volume 9, Issue 3, 2019, Pages 139-153]
  • Amjadian, B. Simulation of baffle effects on sloshing in model aircraft fuel tank [Volume 9, Issue 2, 2019, Pages 275-287]
  • Ardakanian, R. Design & development of modular compact series elastic actuator for lower limb extremity assistant exoskeleton [Volume 9, Issue 3, 2019, Pages 109-123]
  • Aroo, H. Modeling of creep behavior in AlSiCuNiMg alloy at different temperatures and stress levels [Volume 9, Issue 2, 2019, Pages 61-76]
  • Azadi, M. Modeling of creep behavior in AlSiCuNiMg alloy at different temperatures and stress levels [Volume 9, Issue 2, 2019, Pages 61-76]
  • Azadi, Sh. A new estimation approach of road friction coefficient and optimum wheel slip ratio for longitudinal and lateral vehicle dynamics control using active steering and braking [Volume 9, Issue 3, 2019, Pages 231-247]

B

  • Babaei, H. Plastic deformation of polymeric-coated aluminum plates subjected to gas mixture detonation loading: Part I: Experimental studies [Volume 9, Issue 1, 2019, Pages 71-83]
  • Babaei, H. Plastic deformation of polymeric-coated aluminum plates subjected to gas mixture detonation loading: Part II: Analytical and empirical modelling [Volume 9, Issue 2, 2019, Pages 15-29]
  • Babaei, H. Experimental Investigation of Spot Welding Process on Metallic Targets Impacted by Flat and Conical Projectiles [Volume 9, Issue 3, 2019, Pages 39-49]
  • Bagheri, A. Noise Removal from the Vibration Signals of the Rotating Machinery Using the Empirical Wavelet Transform and the Conventional Thresholding Methods [Volume 9, Issue 1, 2019, Pages 111-124]
  • Bagheri, A. A New Intelligent Method for Bearing Fault Detection Based on Co-integration Concept and Selecting the Optimal Feature Set at Time-Varying Speed Conditions [Volume 9, Issue 4, 2019, Pages 41-57]
  • Bakhsh Zahmatkesh, B. Performance evaluation of Ferric oxide (Fe3O4) and Graphene nanoplatelet (GNP) nanoparticles in solar steam generation [Volume 9, Issue 2, 2019, Pages 181-196]
  • Barazandeh, H. Experimental Investigation of Cavitation Phenomena Around the Body with the Conic Nose and Cylindrical Afterbody [Volume 9, Issue 2, 2019, Pages 249-259]
  • Bashi, H. Numerical investigation of temperature field and laminar flame structure of inclined impinging jets of methane and hydrogen [Volume 9, Issue 4, 2019, Pages 251-261]
  • Bathaee, Seyed hasan Sensitivity analysis of peripheral parameters in three dimentional nano-manipulation by using HK model [Volume 9, Issue 2, 2019, Pages 123-139]

D

  • Daneh Dezfuli, A. R. Simulation of Two-Phase Oil and Air Flow of the Lower Bearing of Shahid Abbaspour Dam Power Plant Generator [Volume 9, Issue 1, 2019, Pages 203-216]
  • Dehghan, A.A. Numerical Investigation of the Effect of Different Inflow Conditions on Turbulent Boundary Layer Flow Characteristics using Large-Eddy Simulation [Volume 9, Issue 2, 2019, Pages 261-274]
  • Dehghan Manshadi, M. The evaluation of the angle of attack effects on structure of diamond wing with sharp leading edge being equipped with LEX by using flow visualization [Volume 9, Issue 3, 2019, Pages 265-275]
  • Deldar, S. Study and Investigation of Secondary Sedimentation Tank Equipped with Lamella using Discrete Phase Model (DPM) [Volume 9, Issue 1, 2019, Pages 173-186]
  • Domiri Ganji, D. Numerical study of effect of inlet flow turbulent on trajectory and breakup of liquid jet in crossflow [Volume 9, Issue 2, 2019, Pages 167-179]

E

  • Esmaeeli, A. Numerical Investigation of Polygonal Hydraulic Jump Formation Mechanism and its Flow Structure [Volume 9, Issue 3, 2019, Pages 191-203]
  • Ezoji, R. Aerodynamic analysis and modeling of effect of nose shape parameters on overturn of high speed train under crosswind [Volume 9, Issue 3, 2019, Pages 155-176]

F

  • Farmani, M. Numerical Investigation of the Effect of Different Inflow Conditions on Turbulent Boundary Layer Flow Characteristics using Large-Eddy Simulation [Volume 9, Issue 2, 2019, Pages 261-274]
  • Farrokhi, M. Fuzzy optimal treatment of AIDS-related non-Hodgkin’s cancer [Volume 9, Issue 2, 2019, Pages 211-225]
  • Farshidianfar, A. Theoretically and Parametrically Investigation on Operation of Variable Diameter Impact Damper in Free Vibrations of a 1-DOF System [Volume 9, Issue 1, 2019, Pages 15-26]
  • Feryduni, J. Analysis of a High-Speed Underwater Supercavitating Projectile Dynamics, Based on an Experiment [Volume 9, Issue 1, 2019, Pages 279-291]
  • Forouzesh, A. Simulation of Focusing Phased Array Ultrasonic in Dissimilar Metal Welds for Detecting the Defects [Volume 9, Issue 2, 2019, Pages 77-92]

G

  • Ghafarirad, H. Mass Detection by Theoretical and Experimental Frequency Response Analysis of Bending Piezoelectric Actuators [Volume 9, Issue 4, 2019, Pages 27-39]
  • Ghaffari, V. Design and Tuning of Robust Proportional-Derivative Sliding-Mode Control (PD-SMC) in Stabilization of 2-DOF Robot Manipulator [Volume 9, Issue 4, 2019, Pages 137-150]
  • Ghafurian, M. M. Performance evaluation of Ferric oxide (Fe3O4) and Graphene nanoplatelet (GNP) nanoparticles in solar steam generation [Volume 9, Issue 2, 2019, Pages 181-196]
  • Ghasemi, E. Experimental investigation and optimal analysis of the high-velocity forming process of bilayer plates [Volume 9, Issue 3, 2019, Pages 65-80]
  • Ghaznavi, A. Stress and displacement analysis of thick sandwich plates with deformable auxetic cores using an enhanced third order global-local theory [Volume 9, Issue 2, 2019, Pages 109-122]
  • Gholami, O. Modeling and Control of a 3PRS Robot Using Lagrange Method [Volume 9, Issue 3, 2019, Pages 25-38]

H

  • Hahsemi, Sayyed H. Experimental study of mechanical behavior of welded API X70 pipe steel using tensile and three point bend specimens [Volume 9, Issue 4, 2019, Pages 93-106]
  • Hajilary, N. CFD Simulation of Anode Solid Oxide Fuel Cell [Volume 9, Issue 1, 2019, Pages 217-235]
  • Hakamifard, M. Numerical and Analytical Calculation of Munk Moment in Real Flow for an Autonomous Submarine in Pure Sway Motion in PMM Test [Volume 9, Issue 3, 2019, Pages 205-216]
  • Hashemi, M. R. The evaluation of the angle of attack effects on structure of diamond wing with sharp leading edge being equipped with LEX by using flow visualization [Volume 9, Issue 3, 2019, Pages 265-275]
  • Heidari, S. A recursive algorithm to exploit a multiple-arm space manipulator equations of motion by the Lagrange method in terms of quasi-coordinates [Volume 9, Issue 4, 2019, Pages 15-26]
  • Hemmati, R. Effects of boundary conditions, cone angle and core material on free vibration of the joined sandwich conical-conical shell [Volume 9, Issue 4, 2019, Pages 167-180]
  • Hojaji, M. Experimental Investigation of the Effect of Location of Cylindrical Protuberance on the Thrust Vector of a Supersonic C-D nozzle [Volume 9, Issue 1, 2019, Pages 237-249]
  • Hosseini Baghdad Abadi, M. Numerical Investigation of the Effect of Sinusoidal Pulsating Cooling Air on Film Cooling Effectiveness of Leading Edge, Pressure and Suction Side of a Turbine Blade [Volume 9, Issue 2, 2019, Pages 227-247]
  • Hosseinzadeh Salehkouh, S. Experimental Investigation of Spot Welding Process on Metallic Targets Impacted by Flat and Conical Projectiles [Volume 9, Issue 3, 2019, Pages 39-49]
  • Houshfar, E. Numerical investigation of temperature field and laminar flame structure of inclined impinging jets of methane and hydrogen [Volume 9, Issue 4, 2019, Pages 251-261]

I

  • Ilbeigi, M. The evaluation of the angle of attack effects on structure of diamond wing with sharp leading edge being equipped with LEX by using flow visualization [Volume 9, Issue 3, 2019, Pages 265-275]

J

  • Jafari, A. Enhancing numerical stability in simulation of viscoelastic fluid flows at high weissenberg number problem [Volume 9, Issue 3, 2019, Pages 217-230]
  • Jafari, I. Experimental Investigation of Cavitation Phenomena Around the Body with the Conic Nose and Cylindrical Afterbody [Volume 9, Issue 2, 2019, Pages 249-259]
  • Jafari, M. An analytical solution for asymmetric non-Fourier heat conduction in a long solid orthotropic cylinder [Volume 9, Issue 3, 2019, Pages 95-108]
  • Jafarian, A. Study and Investigation of Secondary Sedimentation Tank Equipped with Lamella using Discrete Phase Model (DPM) [Volume 9, Issue 1, 2019, Pages 173-186]
  • Jafarmadar, S. Energy and exergy analyses of various configures for combined flash-binary cycles using Sabalan geothermal wells [Volume 9, Issue 4, 2019, Pages 237-249]
  • Jahanshahi Javaran, E. investigation of rheological behavior of suspensions included power-law fluid by combined lattice-Boltezmann method with smoothed profile method [Volume 9, Issue 2, 2019, Pages 197-210]
  • Jalali, A. Investigation of the process parameter effects on the hole geometry characteristics in laser drilling of Hastelloy X superalloy [Volume 9, Issue 1, 2019, Pages 45-54]

K

  • Kadivar, M. H Dynamic Analysis of Autofrettage under Transient Loading in FG Thick-Walled Cylinder with Work Hardening Behavior Using Numerical Method [Volume 9, Issue 1, 2019, Pages 27-43]
  • Karami Mohammadi, A. Vibration analysis of pipe conveying fluid, made of functionally graded material in thickness direction [Volume 9, Issue 4, 2019, Pages 107-116]
  • Karimshahian Bidgoli, A.R. Investigation Axisymmetric Aerospike Nozzle [Volume 9, Issue 3, 2019, Pages 177-189]
  • Kaveh, R. Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Micromixer at Different Aspect Ratios of Stirrer by LBM [Volume 9, Issue 1, 2019, Pages 187-202]
  • Kazemi Nasrabadi, M. Investigation of Shear Strength of the Bonding Region for Dissimilar Aluminum Alloy Sheets in Friction Stir Spot Welding Process [Volume 9, Issue 1, 2019, Pages 125-138]
  • Keyfarikheybari, A. An analytical solution for asymmetric non-Fourier heat conduction in a long solid orthotropic cylinder [Volume 9, Issue 3, 2019, Pages 95-108]
  • Khalilarya, Sh. Energy and exergy analyses of various configures for combined flash-binary cycles using Sabalan geothermal wells [Volume 9, Issue 4, 2019, Pages 237-249]
  • Khatibi, M.M. Indirect Damage detection in bridge using transmissibility measurements from the response of a passing vehicle [Volume 9, Issue 4, 2019, Pages 59-76]
  • Khorram, A. Investigation of the process parameter effects on the hole geometry characteristics in laser drilling of Hastelloy X superalloy [Volume 9, Issue 1, 2019, Pages 45-54]
  • Khoshnood, Abdol M. A recursive algorithm to exploit a multiple-arm space manipulator equations of motion by the Lagrange method in terms of quasi-coordinates [Volume 9, Issue 4, 2019, Pages 15-26]
  • Kiani, A. Numerical Investigation of Oscillations of Flexible Stabilizer Attached to Forced Vibrated Body via Fluid-Structure Interaction Simulation [Volume 9, Issue 2, 2019, Pages 47-59]
  • Kiani, M. Numerical investigation of temperature field and laminar flame structure of inclined impinging jets of methane and hydrogen [Volume 9, Issue 4, 2019, Pages 251-261]

M

  • Maadi, Seyed R. Numerical and Experimental Investigation of Entropy Generation in a Supersonic Air Intake at Design Mach number [Volume 9, Issue 1, 2019, Pages 139-152]
  • Mahboubi Fooladi, M. R. Numerical Simulation of steady and unsteady natural convection heat transfer of nanofluids in eccentric and concentric porous annuluses [Volume 9, Issue 4, 2019, Pages 117-136]
  • Mahdavi Keshavar, O. Study and Investigation of Secondary Sedimentation Tank Equipped with Lamella using Discrete Phase Model (DPM) [Volume 9, Issue 1, 2019, Pages 173-186]
  • Mahmoodi, M. Simulation of baffle effects on sloshing in model aircraft fuel tank [Volume 9, Issue 2, 2019, Pages 275-287]
  • Mahzoon, M. Dynamic Analysis of Autofrettage under Transient Loading in FG Thick-Walled Cylinder with Work Hardening Behavior Using Numerical Method [Volume 9, Issue 1, 2019, Pages 27-43]
  • Maleki, Ali Numerical Investigation of Bending Angle and Entropy Generation in Laser Forming of High Strength Steel [Volume 9, Issue 4, 2019, Pages 151-166]
  • Marashi, Seyed M. Indirect Damage detection in bridge using transmissibility measurements from the response of a passing vehicle [Volume 9, Issue 4, 2019, Pages 59-76]
  • Marzbanrad, J. Improve the Crashworthiness Properties of AA7075 Tube under Axial Impact Loading by Geometrical Change [Volume 9, Issue 1, 2019, Pages 55-69]
  • Mehrkish, A. Dynamic responses assessment in fault diagnosis of multi-function active engine mounts with cooling capacities [Volume 9, Issue 3, 2019, Pages 1-12]
  • Meigoli, V. Design and Tuning of Robust Proportional-Derivative Sliding-Mode Control (PD-SMC) in Stabilization of 2-DOF Robot Manipulator [Volume 9, Issue 4, 2019, Pages 137-150]
  • Mirsajedi, Seyyed M. Investigation Axisymmetric Aerospike Nozzle [Volume 9, Issue 3, 2019, Pages 177-189]
  • Mirzababaie Mostofi, T. Plastic deformation of polymeric-coated aluminum plates subjected to gas mixture detonation loading: Part I: Experimental studies [Volume 9, Issue 1, 2019, Pages 71-83]
  • Mirzababaie Mostofi, T. Plastic deformation of polymeric-coated aluminum plates subjected to gas mixture detonation loading: Part II: Analytical and empirical modelling [Volume 9, Issue 2, 2019, Pages 15-29]
  • Mirzababaie Mostofi, T. Experimental Investigation of Spot Welding Process on Metallic Targets Impacted by Flat and Conical Projectiles [Volume 9, Issue 3, 2019, Pages 39-49]
  • Mirzababaie Mostofi, T. Experimental investigation and optimal analysis of the high-velocity forming process of bilayer plates [Volume 9, Issue 3, 2019, Pages 65-80]
  • Mirzaee, I. Influence of gas channels and Gas Diffusion Layers configuration on the performance of Polymer Electrolyte Membrane Fuel Cell [Volume 9, Issue 3, 2019, Pages 249-263]
  • Mirzaei, M. Investigations of Transient Thermal Response of Pulse Detonation Engine Tube under Sequential Operation [Volume 9, Issue 1, 2019, Pages 153-171]
  • Mirzaei, M. Design and Tuning of Robust Proportional-Derivative Sliding-Mode Control (PD-SMC) in Stabilization of 2-DOF Robot Manipulator [Volume 9, Issue 4, 2019, Pages 137-150]
  • Moeenfard, H. Performance Comparison of the Electro/Magneto-Rheological Elastomers for Vibration Reduction of Rotating Rotors [Volume 9, Issue 3, 2019, Pages 139-153]
  • Moeinkhah, H. Analytical solution for nonlinear dynamic response of the viscoelastic microbeam under electrical actuation based upon micropolar theory of elasticity [Volume 9, Issue 3, 2019, Pages 125-138]
  • Mohammadi, H. Dynamic Analysis of Autofrettage under Transient Loading in FG Thick-Walled Cylinder with Work Hardening Behavior Using Numerical Method [Volume 9, Issue 1, 2019, Pages 27-43]
  • Mohammadi, J. Analysis of a High-Speed Underwater Supercavitating Projectile Dynamics, Based on an Experiment [Volume 9, Issue 1, 2019, Pages 279-291]
  • Mohammadi-Amin, M. Numerical Investigation of Oscillations of Flexible Stabilizer Attached to Forced Vibrated Body via Fluid-Structure Interaction Simulation [Volume 9, Issue 2, 2019, Pages 47-59]
  • Mokhtari, D. Experimental Investigation of the Effect of Location of Cylindrical Protuberance on the Thrust Vector of a Supersonic C-D nozzle [Volume 9, Issue 1, 2019, Pages 237-249]
  • Molla-Alipour, M. Stress analysis of circular plates with variable thickness as transverse asymmetric [Volume 9, Issue 1, 2019, Pages 97-109]
  • Moradi, M. Statistical Analysis of Parameters Affecting the Mechanical Properties of Surface Composite Al7075/Al2O3 Produced by Friction Stir Processing Using Response Surface Methodology [Volume 9, Issue 3, 2019, Pages 81-94]
  • Moradi Zirkohi, M. Optimum design of a fractional order PID Controller for AVR system to tune the terminal voltage of a synchronous generator using Cuckoo Optimization Algorithm [Volume 9, Issue 4, 2019, Pages 181-193]
  • Movahedi, M. R. Experimental study of mechanical behavior of welded API X70 pipe steel using tensile and three point bend specimens [Volume 9, Issue 4, 2019, Pages 93-106]
  • Movahedzadeh, S. Enhanced two-dimensional differential transform method for solving homogenous Dirichlet problems; Application: heat transfer in bars [Volume 9, Issue 4, 2019, Pages 209-226]
  • Mozafari shamsi, M. Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Micromixer at Different Aspect Ratios of Stirrer by LBM [Volume 9, Issue 1, 2019, Pages 187-202]

N

  • Naddaf Oskouei, A.R. Presenting a modified theory and analytical investigation of projectile penetration into ceramic - metal semi-infinite targets [Volume 9, Issue 2, 2019, Pages 31-45]
  • Naddaf Oskouei, A.R. Evaluation of the projectile penetration models in the metal and ceramic targets [Volume 9, Issue 4, 2019, Pages 77-92]
  • Nami, M.H. A recursive algorithm to exploit a multiple-arm space manipulator equations of motion by the Lagrange method in terms of quasi-coordinates [Volume 9, Issue 4, 2019, Pages 15-26]
  • Naserinejad, K. Dynamic Response of a Double Beam Interconnected by a Viscoelastic Layer Due to a Moving Vehicle with a Constant Acceleration [Volume 9, Issue 1, 2019, Pages 1-13]
  • Nasseroleslami, A. Modal Analysis of a Vertical Rectangular Plate Semi-Submerged in Water with Different Boundary Conditions [Volume 9, Issue 1, 2019, Pages 85-96]
  • Nazari, M. Fuzzy optimal treatment of AIDS-related non-Hodgkin’s cancer [Volume 9, Issue 2, 2019, Pages 211-225]
  • Nazari, M. Fuzzy optimal treatment of AIDS-related non-Hodgkin’s cancer [Volume 9, Issue 2, 2019, Pages 211-225]
  • Nazari, M. B An analytical solution for asymmetric non-Fourier heat conduction in a long solid orthotropic cylinder [Volume 9, Issue 3, 2019, Pages 95-108]
  • Nezami, M. Supersonic Flutter of a Honeycomb Sandwich Panel with Cermet Constrained Layer under Moving Load Configuration [Volume 9, Issue 4, 2019, Pages 195-208]
  • Nezamivand Chegini, S. Noise Removal from the Vibration Signals of the Rotating Machinery Using the Empirical Wavelet Transform and the Conventional Thresholding Methods [Volume 9, Issue 1, 2019, Pages 111-124]
  • Nezamivand Chegini, S. A New Intelligent Method for Bearing Fault Detection Based on Co-integration Concept and Selecting the Optimal Feature Set at Time-Varying Speed Conditions [Volume 9, Issue 4, 2019, Pages 41-57]
  • Niazmand, H. Performance evaluation of Ferric oxide (Fe3O4) and Graphene nanoplatelet (GNP) nanoparticles in solar steam generation [Volume 9, Issue 2, 2019, Pages 181-196]
  • Nourazar, S. Numerical study of effect of inlet flow turbulent on trajectory and breakup of liquid jet in crossflow [Volume 9, Issue 2, 2019, Pages 167-179]
  • Nourshad, H. Simulation of baffle effects on sloshing in model aircraft fuel tank [Volume 9, Issue 2, 2019, Pages 275-287]

O

  • Ommi, F. Numerical study of effect of inlet flow turbulent on trajectory and breakup of liquid jet in crossflow [Volume 9, Issue 2, 2019, Pages 167-179]
  • Ordokhani, Y. Control a class of fractional-order systems with delay in a specified sector [Volume 9, Issue 3, 2019, Pages 51-63]

P

  • Pashaei, M. H. Indirect Damage detection in bridge using transmissibility measurements from the response of a passing vehicle [Volume 9, Issue 4, 2019, Pages 59-76]
  • Pashazadeh, S. Enhancing numerical stability in simulation of viscoelastic fluid flows at high weissenberg number problem [Volume 9, Issue 3, 2019, Pages 217-230]
  • Passandideh-Fard, M. Numerical Investigation of Polygonal Hydraulic Jump Formation Mechanism and its Flow Structure [Volume 9, Issue 3, 2019, Pages 191-203]
  • Pirkandi, J. Simulation of baffle effects on sloshing in model aircraft fuel tank [Volume 9, Issue 2, 2019, Pages 275-287]
  • Pormahmod, N. Influence of gas channels and Gas Diffusion Layers configuration on the performance of Polymer Electrolyte Membrane Fuel Cell [Volume 9, Issue 3, 2019, Pages 249-263]

R

  • Rabiee, A.H. Vortex-induced vibration annihilation of two-degree-of-freedom circular cylinder by rotational oscillations [Volume 9, Issue 2, 2019, Pages 95-108]
  • Rahaeifard, M. Investigation of the effect of electrostatic actuation on the electromechanical ‎behavior of capacitive pressure microsensors ‎ [Volume 9, Issue 2, 2019, Pages 141-152]
  • Rahmani, H. Analytical solution for nonlinear dynamic response of the viscoelastic microbeam under electrical actuation based upon micropolar theory of elasticity [Volume 9, Issue 3, 2019, Pages 125-138]
  • Rajabi Zargarabadi, M. Numerical Investigation of the Effect of Sinusoidal Pulsating Cooling Air on Film Cooling Effectiveness of Leading Edge, Pressure and Suction Side of a Turbine Blade [Volume 9, Issue 2, 2019, Pages 227-247]
  • Razazan, M.R. Investigation of the process parameter effects on the hole geometry characteristics in laser drilling of Hastelloy X superalloy [Volume 9, Issue 1, 2019, Pages 45-54]
  • Razi Mousavi, Seyed H. Dynamic Analysis of Autofrettage under Transient Loading in FG Thick-Walled Cylinder with Work Hardening Behavior Using Numerical Method [Volume 9, Issue 1, 2019, Pages 27-43]
  • Rezaeepazhand, J. Performance Comparison of the Electro/Magneto-Rheological Elastomers for Vibration Reduction of Rotating Rotors [Volume 9, Issue 3, 2019, Pages 139-153]
  • Rezakazem, M. CFD Simulation of Anode Solid Oxide Fuel Cell [Volume 9, Issue 1, 2019, Pages 217-235]
  • Rostami V.F., M. Numerical and Analytical Calculation of Munk Moment in Real Flow for an Autonomous Submarine in Pure Sway Motion in PMM Test [Volume 9, Issue 3, 2019, Pages 205-216]
  • Rostami V.F., M. Application and Comparison of Pressure and Velocity Correction Methods and Boundary Conditions in WCSPH Method for numerical modelling of 3D Inviscid Fluid Flow [Volume 9, Issue 4, 2019, Pages 227-236]
  • Rouhani Tazangi, H. investigation of rheological behavior of suspensions included power-law fluid by combined lattice-Boltezmann method with smoothed profile method [Volume 9, Issue 2, 2019, Pages 197-210]

S

  • Sabbaghi Farshi, S. Application of laser shearing interferometry in non-destructive inspection and size estimation of plane defects [Volume 9, Issue 4, 2019, Pages 1-14]
  • Saberi, A. Fractal Analysis of Viscous Fingering Instability of Two Reactive Miscible Fluids through Homogeneous Porous Media [Volume 9, Issue 1, 2019, Pages 265-278]
  • Sabour, M. H. Investigating the effects of microtubules in the neuronal cell response to the blast load using fluid-structure interactions method [Volume 9, Issue 3, 2019, Pages 13-24]
  • Sabzali, H. Numerical and Experimental Investigation of Entropy Generation in a Supersonic Air Intake at Design Mach number [Volume 9, Issue 1, 2019, Pages 139-152]
  • Sadeghpour, K. Investigation of Shear Strength of the Bonding Region for Dissimilar Aluminum Alloy Sheets in Friction Stir Spot Welding Process [Volume 9, Issue 1, 2019, Pages 125-138]
  • Saeidiha, M. Vibration analysis of pipe conveying fluid, made of functionally graded material in thickness direction [Volume 9, Issue 4, 2019, Pages 107-116]
  • Safaeifar, H. Theoretically and Parametrically Investigation on Operation of Variable Diameter Impact Damper in Free Vibrations of a 1-DOF System [Volume 9, Issue 1, 2019, Pages 15-26]
  • Saffarian, M. R. Simulation of Two-Phase Oil and Air Flow of the Lower Bearing of Shahid Abbaspour Dam Power Plant Generator [Volume 9, Issue 1, 2019, Pages 203-216]
  • Salimzadeh Kakroudi, M. B. A New Intelligent Method for Bearing Fault Detection Based on Co-integration Concept and Selecting the Optimal Feature Set at Time-Varying Speed Conditions [Volume 9, Issue 4, 2019, Pages 41-57]
  • Sampour, S. Analytical solution for nonlinear dynamic response of the viscoelastic microbeam under electrical actuation based upon micropolar theory of elasticity [Volume 9, Issue 3, 2019, Pages 125-138]
  • Sayahbadkhor, M. Presenting a modified theory and analytical investigation of projectile penetration into ceramic - metal semi-infinite targets [Volume 9, Issue 2, 2019, Pages 31-45]
  • Sayahbadkhor, M. Evaluation of the projectile penetration models in the metal and ceramic targets [Volume 9, Issue 4, 2019, Pages 77-92]
  • Sayah Badkhor, M. Experimental investigation and optimal analysis of the high-velocity forming process of bilayer plates [Volume 9, Issue 3, 2019, Pages 65-80]
  • Sefid, M. Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Micromixer at Different Aspect Ratios of Stirrer by LBM [Volume 9, Issue 1, 2019, Pages 187-202]
  • Selahi, E. Transient Analysis of Functionally Graded Cylindrical Shells Subjected to Asymmetric Thermo-mechanical Shock Loads with Temperature Dependent Material Properties [Volume 9, Issue 2, 2019, Pages 153-166]
  • Sepahi-Younsi, J. Numerical and Experimental Investigation of Entropy Generation in a Supersonic Air Intake at Design Mach number [Volume 9, Issue 1, 2019, Pages 139-152]
  • Setoodeh, A.R. Transient Analysis of Functionally Graded Cylindrical Shells Subjected to Asymmetric Thermo-mechanical Shock Loads with Temperature Dependent Material Properties [Volume 9, Issue 2, 2019, Pages 153-166]
  • Seyyed Jafari, Seyyed A. Investigation Axisymmetric Aerospike Nozzle [Volume 9, Issue 3, 2019, Pages 177-189]
  • Shabani, M. H. Application and Comparison of Pressure and Velocity Correction Methods and Boundary Conditions in WCSPH Method for numerical modelling of 3D Inviscid Fluid Flow [Volume 9, Issue 4, 2019, Pages 227-236]
  • Shahi, A. CFD Simulation of Anode Solid Oxide Fuel Cell [Volume 9, Issue 1, 2019, Pages 217-235]
  • Shahnazari, M. R. Fractal Analysis of Viscous Fingering Instability of Two Reactive Miscible Fluids through Homogeneous Porous Media [Volume 9, Issue 1, 2019, Pages 265-278]
  • Shariyat, M. Stress analysis of circular plates with variable thickness as transverse asymmetric [Volume 9, Issue 1, 2019, Pages 97-109]
  • Shariyat, M. Stress and displacement analysis of thick sandwich plates with deformable auxetic cores using an enhanced third order global-local theory [Volume 9, Issue 2, 2019, Pages 109-122]
  • Sheikh Mohammadi, A. Influence of gas channels and Gas Diffusion Layers configuration on the performance of Polymer Electrolyte Membrane Fuel Cell [Volume 9, Issue 3, 2019, Pages 249-263]
  • Soltani, A. A new estimation approach of road friction coefficient and optimum wheel slip ratio for longitudinal and lateral vehicle dynamics control using active steering and braking [Volume 9, Issue 3, 2019, Pages 231-247]
  • Soltani Goharrizi, A. investigation of rheological behavior of suspensions included power-law fluid by combined lattice-Boltezmann method with smoothed profile method [Volume 9, Issue 2, 2019, Pages 197-210]

T

  • Tahani, M. Transient Analysis of Functionally Graded Cylindrical Shells Subjected to Asymmetric Thermo-mechanical Shock Loads with Temperature Dependent Material Properties [Volume 9, Issue 2, 2019, Pages 153-166]
  • Taheripour, S. Simulation of Two-Phase Oil and Air Flow of the Lower Bearing of Shahid Abbaspour Dam Power Plant Generator [Volume 9, Issue 1, 2019, Pages 203-216]
  • Tahmasbi, N. Control a class of fractional-order systems with delay in a specified sector [Volume 9, Issue 3, 2019, Pages 51-63]
  • Talaee, M. R. Aerodynamic analysis and modeling of effect of nose shape parameters on overturn of high speed train under crosswind [Volume 9, Issue 3, 2019, Pages 155-176]
  • Talebi-Ghadikolaei, Hossein Numerical Investigation of Bending Angle and Entropy Generation in Laser Forming of High Strength Steel [Volume 9, Issue 4, 2019, Pages 151-166]
  • Talebitooti, M. Effects of boundary conditions, cone angle and core material on free vibration of the joined sandwich conical-conical shell [Volume 9, Issue 4, 2019, Pages 167-180]
  • Talebitooti, R. Dynamic Response of a Double Beam Interconnected by a Viscoelastic Layer Due to a Moving Vehicle with a Constant Acceleration [Volume 9, Issue 1, 2019, Pages 1-13]
  • Torkaman Asadi, M. J. Investigations of Transient Thermal Response of Pulse Detonation Engine Tube under Sequential Operation [Volume 9, Issue 1, 2019, Pages 153-171]
  • Tourajizadeh, H. Modeling and Control of a 3PRS Robot Using Lagrange Method [Volume 9, Issue 3, 2019, Pages 25-38]

V

  • Vahdati, M. Statistical Analysis of Parameters Affecting the Mechanical Properties of Surface Composite Al7075/Al2O3 Produced by Friction Stir Processing Using Response Surface Methodology [Volume 9, Issue 3, 2019, Pages 81-94]
  • Vahedi, Kh. Evaluation of the projectile penetration models in the metal and ceramic targets [Volume 9, Issue 4, 2019, Pages 77-92]
  • Vahidi, B. Investigating the effects of microtubules in the neuronal cell response to the blast load using fluid-structure interactions method [Volume 9, Issue 3, 2019, Pages 13-24]
  • Valadi, M. Sensitivity Analysis of Maneuverability of an AUV to Added Mass Coefficients Variations [Volume 9, Issue 2, 2019, Pages 1-13]
  • Valipour, A. Simulation of Focusing Phased Array Ultrasonic in Dissimilar Metal Welds for Detecting the Defects [Volume 9, Issue 2, 2019, Pages 77-92]

Y

  • Yaghootian, A. Simulation of Focusing Phased Array Ultrasonic in Dissimilar Metal Welds for Detecting the Defects [Volume 9, Issue 2, 2019, Pages 77-92]

Z

  • Zakeri, R. Simulation of Fixed Two Ends Micro Polymer Chain in Microchannel Using Dissipative Particle Dynamics [Volume 9, Issue 3, 2019, Pages 277-289]
  • Zareinejad, M. Mass Detection by Theoretical and Experimental Frequency Response Analysis of Bending Piezoelectric Actuators [Volume 9, Issue 4, 2019, Pages 27-39]
  • Zarif, F. Noise Removal from the Vibration Signals of the Rotating Machinery Using the Empirical Wavelet Transform and the Conventional Thresholding Methods [Volume 9, Issue 1, 2019, Pages 111-124]
  • Zeinali, M. Sensitivity Analysis of Maneuverability of an AUV to Added Mass Coefficients Variations [Volume 9, Issue 2, 2019, Pages 1-13]
  • Zirak, S. Numerical Investigation of the Effect of Sinusoidal Pulsating Cooling Air on Film Cooling Effectiveness of Leading Edge, Pressure and Suction Side of a Turbine Blade [Volume 9, Issue 2, 2019, Pages 227-247]